Hangers

Joist Hangers

jh

Reference Series:
Joist Hangers

Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90˚, e.g. truss/joist to beam, or rafter to bearer connection.

Joist Hanger 47 x 90
Designed for use where gauged timber of 47mm width and up to 150mm deep.

Joist Hanger 47 x 120
Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.

Joist Hanger 47 x 190
Used for gauged 47mm thick timber up to 300mm deep.

Joist Hanger 70 x 180
A special size joist hanger designed for gauged 69mm wide timbers.

Joist Hanger 95 x 165
For use on gauged 94mm wide timber or double joists/trusses.

Note: Joist Hangers 52mm wide also available for rough sawn timber.

All of the above Joist Hanger connections should be fixed using LUMBERLOK Product Nails 30mm x 3.15mm diameter,
or Type 17-12g x 35mm Hex Head Screws.

Also available in Stainless Steel 304.

Refer below for Product Data and Installation.

Materials: 0.91mm G300 Z275 Steel

Finish: Zinc Coated

Code Reports: View Code Report Table

Resources

Services

Technical Bulletins

Installation

  • Refer to the product brochure.

Need Help or Have a Question? Contact Customer Service

Videos

LUMBERLOK Joist Hanger